|
 |
Acorn Model #130A Wire Mesh Partitions
All wire type constructed of 10 gauge steel wire woven into 1 ½"
diamond mesh, securely clinched to frames - Vertical frames to be 1 ¼"
x 5/8" cold rolled 'C' section channels with ¼" bolt holes 12" o.c. -
Horizontal frames 1" x ½" cold rolled channels.
All joints mortised and tenoned - Center reinforcing bar 1" x ½" cold
rolled channel tenoned to side frames. All wires pass through center
bar - Woven in stiffener bar; 1 - required for 7' and 8' high
partition; 2 required for 9' and 10' high partition; 3 - required for
12' high partition - Top capping bar 2 ¼" x 1" cold rolled channel with
¼" 'U' bolts 2'4" o.c. May be anchored to walls and or ceilings |
We
have access to a variety of manufacturers in addition to the one shown
above. Let us know if a specific manufacturer is required. Please
contact us for a quote or just to discuss the variety of options that
exist.
For more Wire Mesh Partitions see manufacturer site:
Acorn Wire & Iron Works, Inc.
Miller Wire Works, Inc. |
 |
