|
 |
Wilkinson Linen Chute
Chute Material
The Chute shall be fabricated of #16 U.S. Gauge Aluminized Steel, or optional stainless steel chutes and fittings.
Intakes
21" wide x 21" high, stainless steel, self-closing, positive latching, side hinged, hand operated doors bearing 1-1/2 Hr. 250 °F U.L. "B" label. (Specify masonry or drywall installation.) Intake door to have 180 degree swing operation and be furnished with removable stainless steel door trim with embossed letters (Soiled Linen).
Cylinder Locks (optional)
To prevent unauthorized use of the chute, intake doors can be furnished with keyed-alike locks or master-keyed to the building.
Discharge
Type "H" hopper with 24" wide x 30" high, top hinged, counterbalanced stainless steel door bearing 1-1/2 Hr. 250° F U.L. "B" label with fusible link. Reinforced bottom with #13 gauge impact plate. Hopper to be supported with a 2" pipe pedestal and equipped with 2" IPS drain flange for connection by plumber.
Vent
Provide full diameter vent 4'-0" above roof with metal explosion cap.
Floor Frames
Fabricate floor frames of 1-1/2" x 1-1/2" x 3/16" angles and 1-1/2" x 3/16" bar stock welded assembly.
Sprinklers
1/2" IPS 165 degree sprinkler head with shield above top intake. Additional 1/2" sprinklers and shields at every second intake (or as required by Code). 3/4" IPS flushing spray head centered in chute above top intake ready for connection by plumber.
|
We have access to a variety of manufacturers in addition to the one shown above. Let us know if a specific manufacturer is required. Please contact us for a quote or just to discuss the variety of options that exist.
For more Rubbish and Linen Chutes see manufacturer website:
Wilkinson-Hi-Rise, LLC. |
 |
